Sterilisation im Autoklaven: Das Verfahren, die Temperatur und der Druck

#### **What Is Autoclave Sterilization?**
Using high-pressure steam in an autoclave eliminates every type of microorganism from bacteria to viruses and fungi. Researchers consider this method the most dependable method to destroy all living organisms.

**Key Components of Autoclave Sterilization:**
1. **Steam: The device sends steam energy to objects to sanitize them properly.
2. **Pressure: The increased pressure lets steam heat beyond boiling point.
3. **Temperature: The high temperature of autoclaving kills any spores that resist heat.

The complete sterilization of different materials through autoclaving relies on both steam and pressure working together.

—

#### **The Autoclave Sterilization Process**
The process of autoclaving involves several critical steps to ensure the sterilization of items:

1. **Preparation:**
– **Cleaning: Clean all visible dirt and particles from items before beginning the sterilization process.
– **Packaging: The materials get wrapped in sterilization materials that let steam reach every part.
– **Loading: The items in the autoclave need to be positioned correctly so steam reaches every surface during sterilization.

2. **Sealing and Heating:**
The autoclave chamber seals and heats water to create steam.
The chamber fills with injected steam which pushes out all air particles while building up pressure.

3. **Sterilization Phase:**
The chamber heats steam at precise pressure levels for a specified treatment period.
– Common sterilization settings include:
– **Temperature: The sterilization process happens at temperatures between 250°F and 273°F.
– **Pressure:** 15–30 psi.
– **Time: The sterilization process runs for 15 to 30 minutes based on the load quantity and material type.

4. **Cooling:**
When sterilization ends the chamber returns to normal pressure while items naturally cool.
Some autoclaves add a drying phase to eliminate remaining moisture from the load.

—

Temperature and Pressure Are Fundamental Factors to Achieve Proper Autoclave Sterilization
Autoclave sterilization works best when you set the correct levels of temperature, pressure, and treatment duration.

1. **Temperature:**
A high sterilization temperature kills all forms of living organisms especially hard-to-kill bacterial spores.
Standard autoclave sterilization works at 121°C but some processes use 134°C for faster sterilization of heavily contaminated items.

2. **Pressure:**
When you increase pressure in water it can reach temperatures above boiling point to produce steam.
The autoclave operates at 15 psi to heat water up to 121°C so sterilization can be done effectively.

3. **Time:**
The length of sterilization changes based on the material type and load size.
Steam sterilization runs for 15 to 30 minutes as standard but takes longer with full chamber loads.

—

#### **Recommended Autoclave Sterilization Settings**

—

#### **Steam Sterilization vs. Other Methods**
The practice of steam sterilization gets evaluated against other techniques including dry heat, chemical methods and UV radiation.

—

#### **Common Issues in Autoclave Sterilization**
Autoclave sterilization works well but poor operation leads to failed sterilization results. Below are common issues and their solutions:

1. **Incomplete Air Removal:**
– **Issue: When air remains trapped in the chamber steam cannot reach every surface properly.
– **Solution: Use vacuum-assisted autoclaves because they remove trapped air more effectively.

2. **Overloading:**
– **Issue: Placing too many objects together stops steam from reaching every item in the chamber.
– **Solution: Place items in an autoclave chamber with enough space between them to allow air to flow through.

3. **Inadequate Time or Temperature:**
– **Issue: Short sterilization times or low heat cannot destroy every microbe completely.
– **Solution:** Follow manufacturer-recommended sterilization settings.

—

#### **Before and After Autoclaving**
**Before Sterilization:**
– Sanitize instruments to remove organic matter.
Wrap every tool with sterilization material to shield it from contamination during processing.

**After Sterilization:**
– Allow items to cool before handling.
Keep sterilized instruments in a dry space that stays clean to keep them germ-free.

—

#### **Frequently Asked Questions**

**Q1: What temperature range should an autoclave use for sterilization?
Standard sterilization needs 121°C while faster heat-resistant material sterilization works at 134°C.

**Q2: The amount of pressure during sterilization procedures matters.
Water boils at higher temperatures under pressure so steam reaches extreme heat levels that destroy all bacteria including their resistant spores.

**Q3: What steps can I take to verify my autoclave functions correctly?
The proper functioning of an autoclave depends on routine upkeep plus testing with sterilization indicators such as biological or chemical indicators.

—

#### **Conclusion**
Autoclave sterilization works better than any other method to fully sterilize items across different industries. Users need to follow correct temperature, pressure, and time settings during autoclave use while understanding the sterilization process to get safe results. You need to use autoclave procedures correctly to maintain hygiene standards and meet industry rules for all your sterilized items.

📧 E-Mail: inquiry@shkeling.com
🌐 Website: www.shkeling.com.cn

Wir freuen uns darauf, mit Ihnen eine erfolgreiche Partnerschaft aufzubauen!